Diy Kennel Night Stand

πŸ”₯+ Diy Kennel Night Stand 09 Aug 2020 Valentine's day is approaching us quickly! See some pretty DIY Valentine boxes that girls (and boys) would love to bring to school! After kids ...

Diy Kennel Night Stand They are easy to build and with a few tips, relatively easy to maintain. ... Raised beds around channels to slowly drain water on a New Zealand Market garden, ...

Diy Plywood Cabinets Skip to main content
Ana White
Diy Kennel Night Standhow to Diy Kennel Night Stand for Sweet pea bunk bed
Diy Kennel Night Standhow to Diy Kennel Night Stand for 4' tall reading lamp
Diy Kennel Night Standhow to Diy Kennel Night Stand for Black Farm House Bed
Submitted by Ana White on Mon, 12/07/2009 - 00:30
Difficulty
Beginner
|

A beautiful solid wood coffee table that is heavy, rustic and substantial. From our beloved Tryde Collection.

24β€³ wide x 18β€³ high x 55β€³ long

Preparation

Shopping List

2 3/4β€³ Screws
1 – 2Γ—2 8β€² length board (about $1.50)
1- 2Γ—6 8β€² or stud length board (about $2.50)
4 – 2x4s 8β€² or stud length boards(about $2 each)
1 – 4Γ—4 post at least 6β€² length (about $5)
2 – 1Γ—4 boards (about $2.50 each)
Sandpaper (coarse)
Stain,varnish, paint or other finishing product
Wood Putty

Common Materials
paint brush
Cut List

A) 4 – 4Γ—4 Posts @ 16 1/2β€³ (Legs)
B) 2 – 1Γ—4 @ 20 1/2β€³ (Leg Joiners)
C) 2 – 1Γ—4 @ 40β€³ (Side Aprons)
D) 4 – 1Γ—4 @ 2 3/4β€³ (End Apron Spacer)
E) 2 – 1Γ—4 @ 15β€³ (End Aprons)
F) 4 – 2Γ—2 @ 20 1/2β€³ (Tabletop Supports)
G) 2 – 2Γ—6 @ 24 1/2β€³ (Breadboard Ends)
H) 7 – 2Γ—4 @ 43 1/2β€³ (Tabletop Pieces – Measure the table before cutting these boards)

Tools
General Instructions

Cut out all boards except H. To get the best fit, you will measure and precisely cut out each of the boards H to fit the table. Remember, use the 2 3/4β€³ screws unless otherwise noted and always predrill and countersink your screws. Use glue on all joints to keep the table from seperating later.

Instructions

Step 1

Screw the Leg Joiner, B to the legs, A, as shown above. Do this on both sets of legs. Use the measurements above to guide you.

Step 2

Screw the side aprons, C, into the ends of for 1 last update 2020/08/09 the leg joiners, B, as shown above.Screw the side aprons, C, into the ends of the leg joiners, B, as shown above.

Step 3

Now add the end apron spacers, D, as shown above. Screw into the legs and also screw from the inside of B, the leg joiner, into the end edge of D.

Step 4

Now is a good time to check for square. There is a video in the HOW-TO section to help you check for square.

Step 5

Step 6

Now screw the breadboard ends in, as shown above.

Step 7

Check your table for square again. Now measure the center of the table and mark. Take a length measurement (very precise) and cut your first tabletop board, H.

Step 8

Mark and predrill your tabletop board as shown above. Now place the board in the center of the table, as shown in step 8, and screw inplace from the top. Flip the table over and screw through the supports, F, into the bottom of the tabletop pieces, H.

Step 9

Measure, cut, mark, predrill and place your next row of tabletop boards on the top of the table. Repeat step 9. This time, make sure the edges of the tabletop boards line up. Do not leave gap between the tabletop boards.

Diy Kennel Night Standhow to Diy Kennel Night Stand for Step 10

Fill your screw holes with wood putty and let dry. Sand, distress and finish as desired.

Help Improve This Plan

Diy Kennel Night Standhow to Diy Kennel Night Stand for We apologize if there was an error in this plan. Please help us out and report any errors here.

Comments

beth (not verified)

Mon, 12/07/2009 - 04:34

I found your through The

I found your through The Shabby Nest, and I am so glad that she introduced me to you, cause I''m going to show him the plans tonight! Maybe I''m really Thrilled to find you!!! You''re headed from Michigan to Florida for a wedding just before Christmas...but I can''ll be hearing from me again soon! Merry Christmas!

Maria in TN (not verified)

Fri, 12/11/2009 - 18:12

Ana, is it possible for you

Ana, is it possible for you to post about how to modify this plan for the console Hyde table? It''s skinnier, taller version with a shelf underneath. I would love one of these for behind our sofa...would appreciate any tips or plans you could share. ~Maria

Ana for 1 last update 2020/08/09 White (not verified)Ana White (not verified)

Sun, 12/13/2009 - 22:41

Hi Maria, Thank you so much

Diy Kennel Night Standhow to Diy Kennel Night Stand for Hi Maria,

Thank you so much for reading my blog and leaving comments!

Diy Kennel Night Standhow to Diy Kennel Night Stand for There actually is a for 1 last update 2020/08/09 plan online that is very similar to the Hyde Console Table, but super easy to build - I actually labeled it Simple Cheap and Easy Console Table. It is located here: http://knockoffwood.blogspot.com/2009/11/plan-simple-cheap-and-easy-con…There actually is a plan online that is very similar to the Hyde Console Table, but super easy to build - I actually labeled it Simple Cheap and Easy Console Table. It is located here: http://knockoffwood.blogspot.com/2009/11/plan-simple-cheap-and-easy-con…

I will also be posting plans for the Hyde Console table so check back soon.

Thanks again for stopping by! Ana

Diy Kennel Night Standhow to Diy Kennel Night Stand for Funky Junk Interiors (not verified)

Sat, 01/02/2010 - 12:11

Welcome to the party Ana! I'm

Welcome to the party Ana! I''ve amazed me for weeks now and your stuff needs to simply be seen. :)

Ponder... I think you need a feature in your future. :D

Diy Kennel Night Standhow to Diy Kennel Night Stand for Thanks for linking up one of your wonderful creations to SNS! Folks, this girl the 1 last update 2020/08/09 is baaaad, is she not?!?Thanks for linking up one of your wonderful creations to SNS! Folks, this girl is baaaad, is she not?!?

Funky Junk Donna

Shelly (not the 1 last update 2020/08/09 verified)Shelly (not verified)

Sun, 01/03/2010 - 07:08

Diy Kennel Night Standhow to Diy Kennel Night Stand for I am so excited about finding

I am so excited about finding your blog! I have expensive taste without the budget! My husband is a carpenter and has already made me two items that I wanted from the Pottery Barn...
My "" list is endless...and now I can just pull this site up and show him exactly what I want. Thank you thank you!

Proper Prim (not verified)

Sun, 01/03/2010 - 13:54

I just found you through

I just found you through Funky Junk and I so happy I did. Thank you so much for sharing this. Your directions are so easy I could make this myself.

Deb

Back